 |
Panel accessories
|
Latches
|
|
1" latch
Attaches the 1" x 1" outside corner to the adjacent panel. |
|
3" latch
Used on a 4" or 5" adjustment panel.
|
|
4" latch
Attached to the 4 x 4 corner, it connects the tie and panel adjacent to the corner.
|
|
6" latch
Designed to attach the metal tie and the adjacent panel together. |
|
Off-set latch
Holds panels in place when the bars do not line up. Similar to an ordinary latch except slightly curved, which allows it to be nailed onto one of the panels. All you have to do is attach it to the tie and the bolt; then just nail it in place. |
| |
|
|
Clips
|
|
Corner clip
Securely clips panels and corners that do not have latches. All our corners have latches except 3" x 3" corners. |
|
Half-Clip
To be used when neither the 6" latch nor the 4" latch can be used. The half-clip will firmly hold the tie with its notch to hold the panels together. |
| |
|
|
Scaffolding waler bracket
|
|
When attached to the panel bar, this waler bracket provides excellent support to the planks for walking along the walls. Optional receptacle.
For 2 x 4s. Available in 20" and 24". |
|
Universal waler bracket. This slotted bar can be adjusted to most of our various systems (4, 5 and 6 bar). |
|
This waler bracket, which is attached to 2 bars of the panel, is designed to take a 2 x 4 plank to create a guard rail for work on very high walls. Designed in accordance with the Building Code.
Available in 24". |
|
Wall aligner |
| |
|
|
Ties
|
|
Break-off tool
|
|
Break-off tool (more versatile) |
|
Cone tie
Designed to prevent seepage of water or liquid.
With sealing ring in the middle and cones at both ends. |
|
With cones at both ends. Also available with 1 cone. |
|
Tie for a thermally broken wall (sandwichs wall tie)
Manufactured in order for a wall to be poured, in which an insulating panel may be held by 2 small steel plates.
These small plates may be placed in the middle or off-centre. The insulation panel may be of various thicknesses (2", 3", 4").
|
|
TiesAvailable in 4" to 72" lengths
4" to 19": boxes of 250 ties
20" to 24": boxes of 200 ties
25" to 72": packages of 50 ties
We manufacture ties of any length upon request.
|
| |
|
|
Others
|
|
Hinged or swing corner lock
Fixes the hinged corner at the desired angle. You’ll never have to worry again about seeing your swing corners move when you pour. |
|
Connector panel
12" panel enables you to use 2 different systems.
E.g.: 4 bar and 6 bar.
|
|
“H” bracket for planks
Designed to safely stack a plank on a panel while preserving the wall’s thickness. Effective and quick for pouring walls over 8' high.
|
|
“H” bracket
Designed for stacking your panels horizontally. |
|
Perforated steel strapping
Used for meeting the requirements of certain unusual jobs. |
|
Sliding adjustment panel
Manufactured in 12" to prevent the use of odd panels. The slides enable you to slide the latch to the desired spot in a few seconds. Useful when your wall has a lower portion or a step. This is also the best way to use a 4 bar system with another system, i.e. 5 or 6 bars.
|
| |
|
|
|
